Kurt Manual Vise, 4″ – D40
Part No. D40
$0.00
The D40 vise is recommended for intermediate milling and grinding work. It is an ideal vise for use in matched multiples for holding long parts. With jaw plates
Out of stock
Want to be notified when this product is back in stock?
Description
Description
This product is no longer available.
It has been replaced with the DX4 Crossover Vise and the DX4R Crossover Reverse Vise.
Both will be available April 2018.
This information is being provided as a courtesy to existing customers that already have this model vise and require specific dimensional information for their own internal requirements.
The D40 vise is recommended for intermediate milling and grinding work. It is an ideal vise for use in matched multiples for holding long parts. With jaw plates in their outside positions, this 4 inch vise has a capacity of 10-5/16 inches.
Dimensional Data
Dimensional Data
| Inch | Pounds | |
| A | 2.250 | x |
| B | 4.000 | x |
| C | 12.340 | x |
| D | 2.562 | x |
| E | 0.500 | x |
| F | 1.115 | x |
| G | 1.355 | x |
| H | 1.235 | x |
| J | 0.547 | x |
| K | 4.000 | x |
| L | 1.281 | x |
| N | 0.687 | x |
| O | 2.500 | x |
| P | 3/8-16 | x |
| Q | 6.380 | x |
| R | 5.750 | x |
| S | 2.625 | x |
| T | 4.860 | x |
| U | 0.531 | x |
| V | 0.700 | x |
| W | 9/16 | x |
| AA | 3-7/8 | x |
| AA MIN | 0 | x |
| BB | 5.750 | x |
| BB MIN | 1.400 | x |
| CC | 8.4375 | x |
| CC MIN | 4.100 | x |
| DD | 10.3125 | x |
| DD MIN | 5.900 | x |
| Ship Wt. | x | 32 |
Clamping Force Pounds
Clamping Force Pounds
| Torque Ft. Lbs. | D40 |
| 10 | 1653 |
| 20 | 2923 |
| 30 | 4103 |
| 40 | 5241 |
| 50 | 6513 |
| 60 | 7807 |
Reviews
Reviews
You must be logged in to post a review.
There are no reviews yet.