Kurt Hydraulic Vise Base w/ Cast Jaw Kit, 6″ – HDHLM6C
Part No. HDHLM6C
$3,503.00
Hydraulic Vise Base w/ Cast Jaw Kit, 6″
Description
Description
The HDHLM6C is a 6 inch wide Hydraulic High Density double station vise. This vise features quick change cast steel machinable jaws with Metric fasteners.
Setup Tip:
Hydraulic lines and fittings are located on the rear nut. Verify the overall length of fitting and lines (which are in addition to the vise overall length) when deciding if this vise will fit your application and have rear clearance when installed. Please contact Kurt with any questions before purchasing this item.
NOTE: This is a single acting hydraulic vise.
Resources
Resources
Dimensional Data
Dimensional Data
Clamping Force Pounds
Clamping Force Pounds
| Torque Ft-Lbs | Force in lbs. |
| 10 | 1,540 |
| 20 | 2,500 |
| 30 | 3,350 |
| 40 | 4,300 |
| 50 | 5,750 |
| 60 | 6,850 |
| 70 | 7,450 |
| Hydraulic PSI | Force in lbs. |
| 500 | 850 |
| 1,000 | 1,600 |
| 1,500 | 2,300 |
| 2,000 | 3,100 |
| 2,500 | 3,950 |
| 3,000 | 4,750 |
| 3,500 | 5,450 |
| 4,000 | 6,350 |
| 4,500 | 7,100 |
Replacement Parts
Replacement Parts
HDHLM6/HDHL6 Replacement PartsReviews
Reviews
Be the first to review “Kurt Hydraulic Vise Base w/ Cast Jaw Kit, 6″ – HDHLM6C”
You must be logged in to post a review.
Related Products
Related Products
Related products
-
Kurt Hydraulic Vise Base w/ Hard Jaw Kit, 4″ – HDHLM4J
HDHLM4J
$2,890.00 -
Kurt Hydraulic Vise Base w/ Cast Jaw Kit, 6″ – HDHM6C
HDHM6C
$3,032.00 -
Kurt Hydraulic Vise Base w/ Hard Jaw Kit, 6″ – Metric – HDHLM6J
HDHLM6J
$3,643.00 -
Kurt TL6HCS TriLock Hydraulic Vise – CARVESMART Jaws
TL6HCS
$3,729.00 -
Kurt Hydraulic Vise Base Assembly, 6″ – HDHM6
HDHM6
$2,660.00 -
Kurt Hydraulic Vise Base w/ Aluminum Jaw Kit, 6″ – HDHM6AL
HDHM6AL
$3,004.00
There are no reviews yet.