| 0 | Kurt Handle Assembly - D40I-10-SA | D40I-10-SA | $48.00 | |
| 4 | 1 | Kurt Rear Nut w/ End Cap - SCD430-3R | SCD430-3R | $224.00 | |
| 7 | 1 | Kurt Front Nut - SCD430-3F | SCD430-3F | $224.00 | |
| 16 | 2 | Kurt Collar () - SCD400-8 | SCD400-8 | $58.00 | |
| 10 | 1 | Kurt Split Bushing - SCD400-60 | SCD400-60 | $48.00 | |
| 6 | 1 | Kurt Screw () - SCD400-5 | SCD400-5 | $89.00 | |
| 20 | 2 | Kurt Movable Jaw, Special - SCD400-2S | SCD400-2S | $382.00 | |
| 18 | 1 | Kurt Retaining Ring - SCD400-227 | SCD400-227 | $48.00 | |
| 11 | 1 | Kurt Holding Block - SCD400-212 | SCD400-212 | $219.00 | |
| 30 | 4 | Kurt Set, Screw, Altered - SCD400-196 | SCD400-196 | $27.00 | |
| 29 | 4 | Kurt Movable Jaw, GIB - SCD430-13 | SCD430-13 | $53.00 | |
| 8 | 4 | Kurt Thrust Bearing Washer, 0.060-0.063 - DL400-42A | DL400-42A | $10.00 | |
| 27 | 1 | Kurt Chip Guard, Long - DL400-249 | DL400-249 | $11.00 | |
| 26 | 1 | Kurt Chip Guard, Short - DL400-248 | DL400-248 | $10.00 | |
| 2 | 1 | Kurt End Cap - DL400-218 | DL400-218 | $14.00 | |
| 5 | 3 | Kurt U-Cup Seal - DL400-146 | DL400-146 | $7.00 | |
| 21 | 2 | Kurt Spherical Segment - D40-9 | D40-9 | $9.00 | |
| 22 | 2 | Kurt Jaw Plate, 4" - D40-7 | D40-7 | $58.00 | |
| 9 | 2 | Kurt Thrust Bearing - D40-41 | D40-41 | $10.00 | |
| 13 | 2 | Kurt Screw, SHLDR, .1/2 X 3/8 - 03-2035 | 03-2035 | $10.00 | |
| 15 | 2 | Kurt Screw, BHCS, #10-24 X 3/8 - 03-0124 | 03-0124 | $7.00 | |
| 31 | 4 | Kurt Screw, Set, 1/4-20 X 1/4 - 01-6073 | 01-6073 | $7.00 | |
| 19 | 2 | Kurt Screw, SHSS, 3/8-16 X 7/8 - 01-3308 | 01-3308 | $25.00 | |
| 14 | 2 | Kurt Screw, SHCS, 3/8-16 X 1 Long - 00-1355 | 00-1355 | $7.00 | |
| 17 | 2 | Kurt Screw, SHCS, 3/8-16 X 1/2 - 00-1348 | 00-1348 | $7.00 | |
