| 5 | 8 | Kurt Screw, SHCS, 3/8-16 x 1-3/4 for use with the HDL6 English v - 00-1360 | 00-1360 | $5.00 | |
| 2 | 8 | Kurt Stationary Jaw Locating Pin for use with the HDL6 English v - HD6-277A | HD6-277A | $35.00 | |
| 14 | 4 | Kurt Nut, Machined, Rear - HDLM6-3R-SA | HDLM6-3R-SA | $183.00 | |
| 6 | 4 | Kurt Nut, Machined, Front - HDLM6-3F-SA | HDLM6-3F-SA | $213.00 | |
| 13 | 8 | Kurt Spring, Red, Manual Vise Only - HD6-197 | HD6-197 | $5.00 | |
| 2 | 8 | Kurt Stationary Jaw Locating Pin for use with the HDLM6 Metric v - HDM6-277A | HDM6-277A | $38.00 | |
| 9 | 8 | Kurt Spring Guide, Metric - HDM6-142 | HDM6-142 | $11.00 | |
| 30 | 8 | Kurt Chip Guard, Movable - HDLM6-249 | HDLM6-249 | $7.00 | |
| 36 | 4 | Kurt Chip Guard, Stationary - HDLM6-248 | HDLM6-248 | $8.00 | |
| 4 | 8 | Kurt Stationary Jaw Clamp - HD6-35 | HD6-35 | $22.00 | |
| 3 | 8 | Kurt Clamp Sleeve - HD6-209 | HD6-209 | $27.00 | |
| 19 | 4 | Kurt Holding Block, Metric - DLM640-212 | DLM640-212 | $84.00 | |
| 17 | 4 | Kurt Wiper Ring - DL640-97 | DL640-97 | $6.00 | |
| 27 | 4 | Kurt Collar, Threaded - DL640-91-P | DL640-91-P | $34.00 | |
| 25 | 4 | Kurt Collar - DL640-8A | DL640-8A | $19.00 | |
| 20 | 4 | Kurt O-Ring, 1-3/8 X 1-1/2 - DL640-68 | DL640-68 | $5.00 | |
| 10 | 4 | Kurt Spacer, Threaded - DL640-61A | DL640-61A | $18.00 | |
| 32 | 4 | Kurt Screw - DL640-5B | DL640-5B | $98.00 | |
| 21 | 4 | Kurt Pre-load Spring - DL640-311A | DL640-311A | $8.00 | |
| 31 | 4 | Kurt Clutch - DL640-273B | DL640-273B | $60.00 | |
| 8 | 4 | Kurt Retaining Ring - DL640-231 | DL640-231 | $5.00 | |
| 22 | 4 | Kurt Friction Clamp - DL640-225A-P | DL640-225A-P | $16.00 | |
| 18 | 4 | Kurt Retaining Ring - DL640-217 | DL640-217 | $5.00 | |
| 34 | 12 | Kurt Clutch Spring, Stainless - DL640-215 | DL640-215 | $5.00 | |
| 26 | 24 | Kurt Compression Spring - DL640-197 | DL640-197 | $5.00 | |
| 33 | 4 | Kurt Snap Ring, Trarc, Ext. - DL640-147B | DL640-147B | $5.00 | |
| 7 | 4 | Kurt O-Ring, Metric - DL640-129 | DL640-129 | $5.00 | |
| 28 | 4 | Kurt O-Ring, 1-3/16 ID, 1-5/16 - DL640-128 | DL640-128 | $5.00 | |
| 15 | 4 | Kurt End Cap - DL600-218 | DL600-218 | $9.00 | |
| 12 | 4 | Kurt Wiper Ring - DL430-331 | DL430-331 | $6.00 | |
| 23 | 12 | Kurt Thrust Bearing Washer - D60-42 | D60-42 | $6.00 | |
| 24 | 4 | Kurt Thrust Bearing - D60-41 | D60-41 | $6.00 | |
| 41 | 4 | Kurt Screw, BHCS, M10 X 1.5 X 12 for use with the HDLM6 Metric v - 29-0218 | 29-0218 | $6.00 | |
| 29 | 4 | Kurt Socket, Set Screw, M5 X .8 - 28-1122 | 28-1122 | $5.00 | |
| 5 | 8 | Kurt Screw, SHCS, M10 X 1.5 X 45mm LG for use with the HDLM6 Met - 26-0232 | 26-0232 | $5.00 | |
| 11 | 8 | Kurt Screw, SHCS, M5 X .8 X 6mm LG - 26-0082 | 26-0082 | $5.00 | |
| 35 | 4 | Kurt Dowel Pin, 3/16 DIA - 04-0030 | 04-0030 | $5.00 | |
