Precision Single Axis Small Slide
Part No. K7710

The K7710 is a single axis slide table provides 5mm of movement in single direction. The table can be used in any orientation. As an integral part of the design, springs can be used to balance gravity or other pressures to allow the table to ‘float’. The axis is precision guided using cross roller ball cage bearings on matched sized shafts. The table is ideally designed to be used in measuring applications and will support LVDT pencil probes that are supported in each axis and allow the probe, when pressed against an available anvil, to measure precisely the position or movement in a direction. 

 Write Review
Precision Single Axis Small Slide
Features: Specifications
Travel: 4mm, 8mm & 12mm Travel and Measurement Range
Styles Single & Dual Axis Tables
Linearity: 0.1% 1 micron
Repeatability: < 0.1 micron ? Dependent on Application
Operating Pressure: 2 to 3.5 Bars (40 to 50 PSI)
Contact Force: Adjustable 0 to 4.9 N (500 g)
Mechanical: Linear Bearing Ball Cage
Sensors: Digital, LVDT, Analog & Half Bridge (8mm or .375 Body)
Application: Pneumatic or Spring Actuation & in all Orientation Attitudes
Material: Hot Rolled Steel
Accessories: Hundreds of Extension Arms & Contact Tips
IP Rating: IP55 Protection
Storage Temperature: - 40F to + 185F
Operating Temperature: + 50F to + 185F
Shock: Application Specific Should Be Protected
Robustness: Operating Life > 25 Million cycles
Null Position: Preset
Mass Total: 241, 300.5 & 635 Grams (8.5, 10.6 Ounces & 1.4 Pounds)