KurtUSB LVDT Module
Part No. e4

The KurtUSB LVDT Module provides direct interface to LVDT (Linear Variable Displacement Transformers) transducers. Up to four LVDT transducers can be interfaced to the module at one time. The connector used on the LVDT module will accept the plug end of Kurt's full line of LVDT transducers. The connector is a six-pin Hirose connector that provides a very solid and extremely reliable interface junction. Interfaced LVDT transducers can be either full or half-bridge type. A single footswitch input, available on the module, can also be programmed to collect data when triggered. Using the KurtSPC software, the LVDT can be calibrated to resolve movements for extremely precise measurement capabilities.

(KurtUSB Base Module required for operation)

Additional Information:
Number of Channels per module: 4 Channels
LVDT type supported: Full and Half Bridge
LVDT drive signal: 20 kHz @ 1 Vrms
Number of Gain Levels per channel: 127
Footswitch option: Switch Closure
Connectors:
LVDT Channels:Hirose HR10A-7R-6S
Footswitch: Female Switchcraft #MDSL2ARA
LVDT connector pin-out for six-pin connector

Dimensions
Height X Length X Width
6-1/8” X 3-5/18” X 1-1/4”
Price:  $795.00 
Quantity:
 Write Review
KurtUSB LVDT Module
Number of Channels per module: 4 Channels LVDT type supported: Full and Half Bridge LVDT drive signal: 20 kHz @ 1 Vrms Number of Gain Levels per channel: 127 Footswitch option: Switch Closure Connectors: LVDT Channels:Hirose HR10A-7R-6S Footswitch:ࢼꃊ૘૘뗐ཾཾꃊ૘�ྂ瀠ź펰盘㏈ૡ펰盘㏬ૡItemૡCount`ﱬ휴癟탼癠탼癠￿￿￿￿ꅚ૘ñ㏬ૡ藘Ŭ衉쉱 ﰼ䀋觴䱼Ŷ廖璕