Kurt VB 5 Axis Schenke Clamping System, 100 mm (4")
Part No. 740-01-003-61

The Kurt VB 100 mm 5 Axis Schenke Clamping System gets your work piece up and clear of the machining head. This short version allows for lower profile machining and still has the head clearance required on 5 Axis machines.

* The clamping height above the machine table can be raised by using the mounting block raise. 
740-04-025-00 25 mm raise or 740-04-050-00 50 mm raise

* See vise accessories to ordered mounting blocks and support plates. See note below.

Price:  $2,078.00 
Quantity:
 Write Review
Kurt VB 5 Axis Schenke Clamping System, 100 mm (4
  • Clamping height above machine table: 100 mm* (3.937")
  • Extended height +25 mm: 125 mm* (4.921")
  • Extended height +50 mm: 150 mm* (5.906")
  • Jaw width: 100 mm (3.937")
  • Clamping with with standard set:: 20-236 mm (0.787"-9.291")
  • Clamping depth: 8 mm (0.315")
  • * The clamping height above the machine table can be raised by using the mounting block raise. 740-04-025-00 25 mm raise or 740-04-050-00 50 mm raise​

Dimensional Data

Data
 CommentDesignation
A1 pieceFixed jaw
B1 pieceMoving jaw
C2 piecesClamping jaw for pins
D1 pieceTension spindle w/ driving sleeve and spindle nut
EL 120 mm (4.724")Ext. shaft w/ cap nut
EL 60 mm (2.362")Ext. shaft w/ cap nut
F12 piecesPins 0.5 mm
GpairSupport blades
HpairMounting blocks

Clamping Force Pounds

kNClamping Force Lbs.
5-401124-8992

Products We Recommend