Kurt Workholding - VB 5AX100 Schenke Clamping System

VB 5 Axis Workholding Examples

VB 5AX100 Schenke Clamping System
Pos.	Item no.	Designation		Dimension		VB 5 AX 100-H	VB 5 AX 100-L
Pos.	Item no.	Designation		mm	Inch	VB 5 AX 100-H	VB 5 AX 100-L
1	740-01-000-51	VB 5 AX 100-H Vise-Set without mounting blocks				•
1	740-01-003-61	VB 5 AX 100-L Vise-Set without mounting blocks					•
2	740-02-000-00	Mounting blocks without holes	pair	98 x 158 x 36	3.858" x 6.220" x 1.417"	•	•
3	740-02-063-12	Mounting blocks for T-slot, 63 mm	pair	98 x 158 x 36	3.858" x 6.220" x 1.417"	•	•
	740-02-080-12	Mounting blocks for T-slot, 80 mm	pair	98 x 158 x 36	3.858" x 6.220" x 1.417"	•	•
	740-02-100-12	Mounting blocks for T-slot, 100 mm	pair	98 x 158 x 36	3.858" x 6.220" x 1.417"	•	•
	740-02-125-12 1)	Mounting blocks for T-slot, 125 mm	pair	98 x 158 x 36	3.858" x 6.220" x 1.417"	•	•
	740-02-160-12 1)	Mounting blocks for T-slot, 160 mm	pair	98 x 200 x 36	3.858" x 7.874 " x 1.417"	•	•
	740-02-140-16 1)	Mounting blocks for T-slot, 140 mm	pair	98 x 200 x 36	3.858" x 7.874 " x 1.417"	•	•
4	740-03-030-10 1)	Mounting blocks, for location grid 30x30xM10	pair	98 x 140 x 36	3.858" x 5.512 " x 1.417"	•	•
	740-03-040-12	Mounting blocks, for location grid 40x40xM12	pair	98 x 148 x 36	3.858" x 5.827" x 1.417"	•	•
	740-03-050-12	Mounting blocks, for location grid 50x50xM12	pair	98 x 138 x 36	3.858" x 5.433" x 1.417"	•	•
	740-03-050-16	Mounting blocks, for location grid 50x50xM16	pair	98 x 134 x 36	3.858" x 5.276" x 1.417"	•	•
5	740-05-040-12	Mounting blocks, for location grid 40x40xM12 fixed	piece	98 x 150 x 36	3.858" x 5.906" x 1.417"	•	•
6	740-05-050-12	Mounting blocks, for location grid 50x50xM12 fixed	piece	98 x 190 x 36	3.858" x 7.48" x 1.417"	•	•
7	740-05-050-16	Mounting blocks, for location grid 50x50xM16 fixed	piece	98 x 150 x 36	3.858" x 5.906" x 1.417"	•	•
8	740-06-040-12	Mounting blocks, for location grid 40x40xM12 fixed/moving	pair	98 x 150/148 x 36	3.858" x 5.906"/5.512" x 1.417"	•	•
	740-06-050-12	Mounting blocks, for location grid 50x50xM12 fixed/moving	pair	98 x 190/138 x 36	3.858" x 7.48"/5.433" x 1.417"	•	•
	740-06-050-16	Mounting blocks, for location grid 50x50xM16 fixed/moving	pair	98 x 150/134 x 36	3.858" x 5.906"/5.276" x 1.417"	•	•
9	740-04-025-00	Mounting block raise with screws	pair	H 25 mm	H 0.984"	•	•
9	740-04-050-00	Mounting block raise with screws	pair	H 50 mm	H 1.969"	•	•
10	740-10-060-00	Extension shaft with cap nut		L 60 mm	L 2.362"	•	•
	740-10-120-00	Extension shaft with cap nut		L 120 mm	L 4.724"	•	•
	740-10-240-00	Extension shaft with cap nut		L 240 mm	L 9.448"	•	•
11	740-11-001-00	Tension spindel with driving sleeve		M18 x 1.5		•	•
12	740-11-002-00	Spindle nut				•	•
13	740-11-003-00	Knurled assembly bolt				•	•
14	740-12-100-00	Work piece support plates heat treated and ground	pair	H 100, B 100 mm	H 3.937", B 3.937"		•
	740-12-125-00	Work piece support plates heat treated and ground	pair	H 125, B 100 mm	H 6.889", B 3.937"		•
	740-12-150-00	Work piece support plates heat treated and ground	pair	H 150, B 100 mm	H 5.906", B 3.937"		•
	740-12-175-00	Work piece support plates heat treated and ground	pair	H 175, B 100mm	H 6.889", B 3.937"	•
	740-12-200-00	Work piece support plates heat treated and ground	pair	H 200, B 100 mm	H 7.874", B 3.937"	•
	740-12-225-00	Work piece support plates heat treated and ground	pair	H 225, B 100 mm	H 8.858", B 3.937"	•
15	740-13-050-00	Work stop	set	for H 175 mm	for H 6.889"	•
15	740-13-100-00	Work stop	set	for H 100 mm	or H 3.937"		•
16	740-14-014-12	Screw and T-nut for slot width 14 mm, M12 for VB 5 AX 100-H	set			•
	740-14-114-12	Screw and T-nut for slot width 14 mm, M12 for VB 5 AX 100-L	set				•
	740-14-018-12	Screw and T-nut for slot width 18 mm, M12 for VB 5 AX 100-H	set			•
	740-14-118-12	Screw and T-nut for slot width 18 mm, M12 for VB 5 AX 100-L	set				•
	740-14-022-16 1)	Screw and T-nut for slot width 22 mm, M16	set			•
17	740-15-008-06	Clamping jaw for pins	piece	L 100 mm	L 3.937"	•	•
18	740-15-015-06	Machinable jaw	piece	L 100 mm	L 3.937"	•	•
19	740-16-001-01	Clamping for round pieces	set			•	•
20	740-17-000-00	Pin flat				•	•
21	740-17-025-00	Pin 0.25 mm				•	•
22	740-17-400-00	Pin 0.3 mm cup point				•	•
23	740-17-050-00	Pin 0.5 mm				•	•
24	740-20-030-10 1)	Bracket for location grid 30 mm M10	piece			•	•
	740-20-040-12	Bracket for location grid 40 mm M12	piece			•	•
	740-20-050-12	Bracket for location grid 50 mm M12	piece			•	•
	740-20-050-12	Bracket for location grid 50 mm M12	piece			•	•
	740-20-050-16	Bracket for location grid 50 mm M16	piece			•	•
	740-21-040-12	Middle bracket, grid 40 mm M12, to mount 2 vises beside	piece			•	•
25	740-55-001-20	Indicator with threaded pin				•	•
26	775 PT31-1215	Screw M12 x 67/33 for location grid				•	•
26	775 PT31-1655	Screw M16 x 72/28 for location grid				•	•
	Stahlwille 20	Torque Wrench		40 - 200 Nm		•	•