This manually operated, eight station HDL Cluster Tower system features
a ductile iron integral vise tower. Designed for use on mid-size and larger machining centers including horizontal and vertical machining centers with
a fourth axis and indexable tables. This workholding system achieves workpiece immobility while damping cutter induced vibration.
Features:
-
High density vise tower system. Hold multiple parts in eight clamping stations. Increase part volume.
-
Repeatable clamping to 0.0002". Each station delivers up to 5,870 lbs.
of clamping force at 60 ft lbs of torque.
-
Self-adjusting holding block of either front or back jaw for clamping the same or dissimilar sized parts. To further enhance fast operation, an adjustable pre-load feature reduces handle turns for opening and closing clamping stations.
-
Ductile iron column insures strength, rigidity and long
term accuracy.
-
Jaw options available to fit your application. Select from Hard jaws, Machinable aluminum jaws, Machinable ductile Iron jaws.
-
Jaws are indexable 180 degrees.
-
Base sizes available include: 300mm, 400mm, 500mm.
-
Elevated column makes clearing chips and contaminants fast and easy.
-
Lifetime Iron Clad Warranty.
Jaws for HDL Towers are sold separately
and available with the following options:
• Hard Jaws • Machinable Aluminum Jaws
• Machinable Ductile Iron Jaws
• Aluminum Fixture Plate
|
CLAMPING FORCE LBS. |
| Torque- Ft. Lbs. |
HDLM4 |
Hydraulic PSI |
HDHLM4 |
| 10 |
1,040 |
1,000 |
775 |
| 20 |
2,125 |
1,500 |
1,450 |
| 30 |
3,140 |
2,000 |
1,900 |
| 40 |
4,040 |
2,500 |
2,550 |
| 50 |
4,980 |
3,000 |
3,100 |
| 60 |
5,870 |
3,500 |
3,700 |
| |
|
4,000 |
4,200 |
| |
|
4,500 |
4,800 |
|
CTHDLM444AL
(shown with optional
machinable aluminum jaws)
CTHDLM444J
(shown with optional hard jaws)
|
