This manually operated, eight station HDL Cluster Tower system features a ductile iron integral vise tower. Designed for use on mid-size and larger machining centers including horizontal and vertical machining centers with a fourth axis, and indexable tables. This workholding system achieves workpiece immobility while damping cutter induced vibration.
Features:
-
High density vise tower system. Hold multiple parts in eight clamping stations. Increase part volume.
-
Repeatable clamping to 0.0002". Each station delivers up to 7,460 lbs. of clamping force at 70 ft lbs of torque.
-
Self-adjusting holding block of either front or back jaw for clamping the same or dissimilar sized parts. To further enhance fast operation, an adjustable pre-load feature reduces handle turns for opening and closing clamping stations.
-
Ductile iron column insures strength, rigidity and long
term accuracy.
-
Jaw options available to fit your application. Select from Hard jaws, Machinable aluminum jaws, Machinable ductile Iron jaws and Aluminum fixture plate.
-
Jaws are indexable 180 degrees.
-
Base sizes available include: 400mm, 500mm, 630mm.
-
Elevated column makes clearing chips and contaminants fast and easy.
-
Lifetime Iron Clad Warranty.
Jaws for HDL Towers are sold seperately
and available wit the following options:
• Hard Jaws • Machinable Aluminum Jaws
• Machinable Ductile Iron Jaws
• Aluminum Fixture Plate
|
CLAMPING FORCE LBS. |
| Torque- Ft. Lbs. |
HDLM6 |
Hydraulic PSI |
HDHLM6 |
| 10 |
1,540 |
500 |
875 |
| 20 |
2,520 |
1000 |
1,600 |
| 30 |
3,350 |
1500 |
2,330 |
| 40 |
4,310 |
2000 |
3,130 |
| 50 |
5,750 |
2500 |
3,950 |
| 60 |
6,860 |
3000 |
4,750 |
| 70 |
7,460 |
3500 |
5,475 |
| |
|
4000 |
6,350 |
| |
|
4500 |
7,100 |
| |
|
Hyd. Displacement
1.08 cubic inches |
|
CTHDLM644 Shown with Optional
Machinable Aluminum Jaws
CTHDLM644 Shown
with Optional Hard Jaws
|
