» » »

Locking Pins

The PinLock™ system is designed to reduce time spent accurately positioning and clamping fixture plates and subplates. A system requires a minimum of two PinLock™ locators, a primary and a secondary locator. Or two primary bushings can be used to achieve higher accuracy. Liner bushings are used to reduce wear on fixture plates. Receiver bushings are used with the PinLock for locating and clamping. For larger subplates additional PinLocks may be used where higher holding force is required. Additional clearance is required on these PinLocks so as not to influence the primary and secondary locators.

	Product Name	Part No.
	PinLock clamping assembly 20mm shank for 0.750" plate thickness	PL20-075
	PinLock clamping assembly 20mm shank for 1.000" plate thickness	PL20-100
	PinLock clamping assembly 25mm shank for 0.750" plate thickness	PL25-075
	PinLock clamping assembly 25mm shank for 1.000" plate thickness	PL25-100
	PinLock clamping assembly 30mm shank for 0.750" plate thickness	PL30-075
	PinLock clamping assembly 30mm shank for 1.000" plate thickness	PL30-100
	PinLock clamping assembly 35mm shank for 0.750" plate thickness	PL35-075
	PinLock clamping assembly 35mm shank for 1.000" plate thickness	PL35-100
	PinLock clamping assembly 35mm shank for 1.500" plate thickness	PL35-150
	PinLock clamping assembly 35mm shank for 2.000" plate thickness	PL35-200
	PinLock clamping assembly 50mm shank for 0.750" plate thickness	PL50-075
	PinLock clamping assembly 50mm shank for 1.000" plate thickness	PL50-100
	PinLock clamping assembly 50mm shank for 1.500" plate thickness	PL50-150
	PinLock clamping assembly 50mm shank for 2.000" plate thickness	PL50-200
	PinLock Hex Tool	PLHT2

Displaying 1 to 15 (of 15 products)

Result Pages: 1