Resources:

Kurt VB 5 Axis Schenke Clamping System, 100 mm (4")

Part No. 740-01-003-61

The Kurt VB 100 mm 5 Axis Schenke Clamping System gets your work piece up and clear of the machining head. This short version allows for lower profile machining and still has the head clearance required on 5 Axis machines.

* The clamping height above the machine table can be raised by using the mounting block raise.
740-04-25-00 25 mm raise or 740-04-050-00 50 mm raise

Clamping height above machine table: 100 mm* (3.937")
Extended height +25 mm: 125 mm* (4.921")
Extended height +50 mm: 150 mm* (5.906")
Jaw width: 100 mm (3.937")
Clamping with with standard set:: 20-236 mm (0.787"-9.291")
Clamping depth: 8 mm (0.315")
* The clamping height above the machine table can be raised by using the mounting block raise. 740-04-25-00 25 mm raise or 740-04-050-00 50 mm raise

Price

: $2,641.00 USD

Quantity

Dimensional Data

	Comment	Designation
A	1 piece	Fixed jaw
B	1 piece	Moving jaw
C	2 pieces	Clamping jaw for pins
D	1 piece	Tension spindle w/ driving sleeve and spindle nut
E	L 120 mm (4.724")	Ext. shaft w/ cap nut
E	L 60 mm (2.362")	Ext. shaft w/ cap nut
F	12 pieces	Pins 0.5 mm
G	pair	Support blades
H	pair	Mounting blocks

Order support plates separately (740-12-xxx-xx), according to required clamping height above table (CH - 100, 125, 150, 175 200 or 225 mm). You will also need to order mounting blocks separately depending on your machine table or fixture. Parts No. 740-02-xxx-xx, 740-03-xxx-xx, 740-05-xxx-xx or 740-06-xxx-xx.

Clamping Force Pounds

kN	Clamping Force Lbs.
5-40	1124-8992

Additional Images

Click to enlarge	Click to enlarge