Resources:

Kurt VB 5 Axis Schenke Clamping System, 175 mm (6")

Part No. 740-01-000-51

The Kurt VB 175 mm 5 Axis Schenke Clamping System gets your work piece up and clear of the machining head. This taller version allows for larger head clearance required on large 5 Axis machines.

* The clamping height above the machine table can be raised by using the mounting block raise.
740-04-25-00 25 mm raise or 740-04-050-00 50 mm raise

Clamping height above machine table: 175 mm* (6.889")
Extended height +25 mm: 200 mm* (7.874")
Extended height +50 mm: 225 mm* (8.858")
Jaw width: 10 mm (3.937")
Clamping with with standard set:: 20-236 mm (0.787"-9.291")
Clamping depth: 8 mm (0.315")

Price

: $2,596.00 USD

Quantity

Dimensional Data

	Comment	Designation
A	1 piece	Fixed jaw
B	1 piece	Moving jaw
C	2 pieces	Clamping jaw for pins
D	1 piece	Tension spindle w/ driving sleeve and spindle nut
E	L 120 mm (4.724")	Ext. shaft w/ cap nut
E	L 60 mm (2.362")	Ext. shaft w/ cap nut
F	12 pieces	Pins 0.5 mm
G	pair	Support blades
H	pair	Mounting blocks

Order support plates separately (740-12-xxx-xx), according to required clamping height above table (CH - 100, 125, 150, 175 200 or 225 mm). You will also need to order mounting blocks separately depending on your machine table or fixture. Parts No. 740-02-xxx-xx, 740-03-xxx-xx, 740-05-xxx-xx or 740-06-xxx-xx.

Clamping Force Pounds

kN	Clamping Force Lbs.
5-40	1124-8992

Additional Images

Click to enlarge	Click to enlarge